Our machine-based cleaners

for the edge banding machine

All processes during and after mechanical edge processing
as well as surface cleaning on the EBM.

1. Formatierungszone, 2.Leim- und Druckzone, 3.Nachbearbeitungszone, 4.Finish-Zone

FSG-Trennmittel,
Typ TR 8 PLUS

vor dem Fügefräseaggregat

1

FSG-Kältemittel,
Typ KM 1 PLUS

vor den Kappsägen

2

FSG-Trennmittel,
Typ TR 12 PLUS

vor den Andruckrollen

3

FSG-Kunststoff-Cleaner,
Typ 925 PLUS

vor den Schwabbelscheiben

4

New
One for All
1 2 3 4

FSG-Green Solution Bio

for all stages of the EBM

product

Teclinex One for All – The all-in-one solution

Our proprietary, transparent, bio-alcohol-based cleaner simplifies machine operation and ensures a high-quality finish in edge processing.

  • Reduction in storage costs

  • Active occupational and environmental protection through sustainable, plant-based raw materials

  • Evaporates quickly and leaves no residue

Zone 1

Release agent for the formatting zone

Before the jointing cutters, the release agent is sprayed onto the top and bottom surfaces of the panel in the edge area. It prevents the hot-melt adhesive from adhering unintentionally to the panel surfaces. We offer the following products for this section of the machine:

  • REDOCOL greenline Teclinex One For All

  • FSG Release Agent TR 8 Plus

 

Zone 2

Coolant for the glue and pressure zone

Immediately after the pressure rollers, a coolant ensures that the still-hot adhesive joint cools down as quickly as possible. This allows the radius to be cleanly milled in the next step. You can use the following products from our range here:

  • REDOCOL greenline Teclinex One For All

  • FSG Coolant KM 1 Plus

 

Zone 3

Release and lubricants for the finishing zone

To ensure that cutters and scrapers work optimally in the post-processing zone, many machines have an additional spray point before post-processing. You can fill the spray bottles with the following products:

  • REDOCOL greenline Teclinex One For All

  • FSG release agent TR 12 Plus

 

Zone 4

Cleaner for the finishing zone

The finished edged panel should leave the machine clean and free of residues. Therefore, a cleaner is sprayed on before the polishing discs. We supply the following products for this purpose:

  • REDOCOL greenline Teclinex One For All

  • FSG Plastic Cleaner 925 Plus

 

A final tip

If your machine has fewer spray units but you still want to protect the pressure rollers and sensors from becoming contaminated with adhesive residues, we recommend the Acmos 100-2450 release spray. With the handy spray can, you can reach even hard-to-access areas inside the machine.

Use in the machine zones

Organization of Functional Work Areas

Zone 1 - Formatting Zone

Release agent for clean edge areas

Before the jointing cutters, the release agent is applied precisely to the top and bottom surfaces of the panel in the edge area. This prevents excess hot-melt adhesive from adhering to the panel surfaces.

Recommended products:

                         or

Zone 2 – Glue and Printing Zone

Refrigerant for rapid curing

After the pressure rollers, a coolant is applied to quickly cool the still-warm adhesive joint. This ensures a precise and clean milling result.

Recommended products:

                      or

Zone 3 – Post-processing zone

Release and lubricating agents for optimal machining

Before using milling cutters and scrapers, an additional cutting and lubricating agent ensures optimal working conditions and clean results during finishing.

Recommended products:

                       or

Zone 4 – Finish Zone

Cleaners for Spotless Surfaces

To ensure that the finished panel leaves the machine free of residue, a cleaner is applied before the buffing discs. This ensures a clean, high-quality final result.

Recommended products:

                          or

Our cleaning products

Everything you need for your application

We offer a range of specialised and patented cleaning products. 
Available in a variety of colours, container sizes and quantities, for manual or machine cleaning.

FSG Green-Solution-Bio
Our new solution for all stages of the edge banding machine. All-in-one cleaner – just one product for the entire edge banding machine.
read more
Release agent, type TR 8 PLUS
in front of the finger-jointing unit
read more
Refrigerant, Type KM 1 PLUS
In front of the mitre saws
read more
Kunststoff-Cleaner, Typ 925 PLUS
in front of the wobbly screens
read more
Release agent, type TR 12 PLUS
for the EBM – before the pressure rollers
read more

Contact

Give us a call

With over 30 years of experience in the production of chemical products for the furniture and exhibition stand construction industries,
we have built up a wealth of expertise.